Bike and helmet
They take sun, rain, insects at 120 and pressure washing. The laminate protects the ink from abrasion and UV.
Need help? 👋
1
Printed and die-cut in house
Customstickers
You upload your design and we cut around its outline, on laminated outdoor vinyl. If it survives your bike, it survives this.
Your design · stuck · wherever you want
Where they end up
Built to stick
Built to stick
where it takes a beating
Our vinyl was born for fairings and wheel rims, so we set the durability bar high. What we print for you comes off the same roll.
Brand and business
Logos for packaging, vans or shop windows. Order 500 and the unit price drops to less than half of what it is at 100.
Car and van
Permanent adhesive that leaves no mark when removed warm.
Any surface
Metal, glass, plastic or paint: if it is smooth and clean, it sticks.
Events and meet-ups
Big runs of your design to hand out at the rally.
Three finishes
Choose your material
All of them are laminated and all are cut the same way. The difference is how they behave with light and with the colour of the surface you stick them on.
White vinyl
The standard. An opaque base that keeps your design's exact colours wherever you stick it. If in doubt, this one.
100 units of 10 × 10 cm
95,20 €
Clear
No white backing: the surface shows through. Great on glass and dark tanks, though light colours lose punch.
100 units of 10 × 10 cm
98,45 €
Holographic
An iridescent base that shifts colour with the angle. Works better with bold artwork than with fine gradients.
100 units of 10 × 10 cm
120,81 €
Three steps
From your file to your letterbox
01
Upload and configure
Drag your PNG, JPG, SVG or PDF into the configurator. You will see the sticker mocked up straight away, and we warn you if the resolution falls short for the size you picked.
02
Approve the proof
Before printing we send you the real mock-up with the cut line marked. If the outline needs adjusting or an element separating, we do it at no cost.
03
We print and cut
Printing, laminating and die-cutting in our own workshop. It ships within 24-72 working hours of your go-ahead.
To scale
How big
How big
each size is
Compared side by side so there are no surprises. They run from 4 × 4 cm, barely bigger than a large stamp, up to 24 × 24 for a window or a shop front. The most requested are 10 × 10 and 12 × 12: they work as well on a tank as on a fridge, a laptop or a door.
Swipe the strip to see them all →
No small print
Pricing
The more you order, the less each one costs. These are white vinyl prices with VAT included; in the configurator you pick from nine sizes and eight quantities, with the price worked out on the spot.
| Size | 50 units | 100 units | 300 units | 500 units |
|---|---|---|---|---|
| 4 × 4 cm | 24,80 € | 36,00 € | 66,40 € | 88,80 € |
| 6 × 6 cm | 36,80 € | 54,40 € | 102,40 € | 140,00 € |
| 8 × 8 cm | 50,40 € | 74,40 € | 142,40 € | 196,80 € |
| 10 × 10 cm | 64,00 € | 95,20 € | 186,40 € | 260,00 € |
| 12 × 12 cm | 77,60 € | 117,60 € | 234,40 € | 330,40 € |
| 14 × 14 cm | 92,80 € | 140,80 € | 285,60 € | 406,40 € |
| 18 × 18 cm | 124,80 € | 192,00 € | 400,00 € | 577,60 € |
| 20 × 20 cm | 141,60 € | 219,20 € | 463,20 € | 672,80 € |
| 24 × 24 cm | 176,80 € | 277,60 € | 600,80 € | 882,40 € |
Clear +3% · Holographic +27% · Minimum order 23,20 €. Free shipping over 60 €.
The boring part
What vinyl we use
What vinyl we use
and why it matters
Printing and laminate
We print your custom stickers on polymeric outdoor vinyl with eco-solvent ink, and on top goes a laminate that does two things: it filters UV so the colour does not fade, and it protects the surface from abrasion. That combination is what lasts three to five years outdoors without fading.
It is the same material we use for our wheel rim vinyls and our motorcycle graphics kits, where the adhesive deals with curves, engine heat and petrol.
Contour cutting
We cut around the real outline of your artwork, not a rectangle. For that we need a file with a transparent background (PNG or SVG) or a vector; if you send us a JPG with a background, we cut it out ourselves when preparing the digital proof.
We leave a white margin of a couple of millimetres around the design, which is what gives the sticker that clean edge and stops it lifting at the corners. If you prefer a flush cut or a geometric shape, you choose that in the configurator.
Which file to send
Ideally a vector (SVG, PDF or AI), which can be printed at any size. If all you have is an image, it should be at least 300 dpi at final size: for a 10 cm sticker, that is around 1200 pixels per side. The configurator works this out for you and flags it in red if it falls short.
Frequently asked
Questions before
Questions before
you order
How long do they take?
Between 24 and 72 working hours of production from the moment you approve the digital proof, plus transit time. On large orders or special finishes we will tell you if we need an extra day.
Can I order a single sticker?
There is no minimum number of units, but there is a minimum of 23,20 € per order, which is what it costs to set the machine running. For that you get 44 stickers of 4 × 4 cm or 8 of 10 × 10 cm, so it pays to make the most of it.
Do they survive pressure washing?
Yes, as long as they are properly stuck down and have cured for 48 hours. Avoid aiming straight at the edge of the sticker from closer than 30 cm, which is where any vinyl can lift.
What if my design is low quality?
The configurator works out the real dpi of your file at the size you picked and warns you before you pay. If something still slips through, we catch it while preparing the digital proof and tell you before printing anything.
Do stickers leave a mark when removed?
The adhesive is permanent. On paint in good condition they come off cleanly if you warm them with a hairdryer and pull slowly; any glue residue comes away with isopropyl alcohol. On plastics already damaged by the sun we cannot guarantee it.
Do you design one if I don't have it?
We adjust, cut out and clean up your file at no cost as part of the digital proof. Creating a design from scratch is separate work: write to us and we will quote you.
Start with your file
Upload it, pick size and material, and you will see the price and the mocked-up sticker before paying anything.
Open the configurator